where do I acquire replacement screws JIS for a 64 305

[ac72rat]

neede dynamo cover screws and also points cover screws , ebay has a few for about $6 each plus about $3 shipping REALLY! Ill drill and tap first

[LOUD MOUSE]

You will enjoy the 3 on the stator. ...............lm

neede dynamo cover screws and also points cover screws , ebay has a few for about $6 each plus about $3 shipping REALLY! Ill drill and tap first

[hotrodhendrix]

I had the most trouble with the really long one on the left cover. Think it cost me $20 just for it and was made for some car haha.

[zeerx]

Try this place. I've ordered a few things from them in the past. They have just about everything.

https://www.belmetric.com/

[LOUD MOUSE]

I've ordered from this company and they are quick on shipping.
I ordered TIME SERT thread kits which are far superior to Heli-Coil as they have a type of coil which actually has a top area which bottoms out at the top rather than twist on into the hole.
Not cheap per each kit but ya will be impressed how the damaged area is repaired.
Simple to install also.
I have the 6/8/and 12 kits which covers about all I need with the engines. .............lm

Try this place. I've ordered a few things from them in the past. They have just about everything.

https://www.belmetric.com/

[ac72rat]

thanks for the tips guys

[paperslammer]

I looked at their website, but didn't see any JIS taps. Does anyone know where to get JIS taps? On of the threads on my engine block is all gummed up.

Thanks