Steverino's CB77

Steverino · Post by **Steverino** » Sat Mar 26, 2016 12:03 am

Here are pictures of the tappet screws in question. Ed, I'll try calling again Saturday morning. I was down at Dad's for three days. I appreciate your help. Here are the new tappet screws.

KIMG0581 (2) by Steve Steverinomeister, on Flickr

KIMG0574 (1) by Steve Steverinomeister, on Flickr

LOUD MOUSE · Post by **LOUD MOUSE** » Sat Mar 26, 2016 1:37 am

Good deal.
They are perfect.
May I ask the cost for each?. ......................lm

Steverino wrote:Here are pictures of the tappet screws in question. Ed, I'll try calling again Saturday morning. I was down at Dad's for three days. I appreciate your help. Here are the new tappet screws.

KIMG0581 (2) by Steve Steverinomeister, on Flickr
KIMG0574 (1) by Steve Steverinomeister, on Flickr

Steverino · Post by **Steverino** » Sat Mar 26, 2016 11:05 pm

Thank you for the over the phone help today LM. As always, I learned something new. New to me anyway.
Steve

LOUD MOUSE · Post by **LOUD MOUSE** » Sun Mar 27, 2016 1:22 am

You're welcome Steve.
Any time for sure. .................lm

Steverino wrote:Thank you for the over the phone help today LM. As always, I learned something new. New to me anyway.
Steve

Steverino · Post by **Steverino** » Mon Mar 28, 2016 6:32 pm

With LM's help I have the valves set properly now. It sounds a lot better. I'm going to take it for a little ride tomorrow and do some fine tuning on the carbs.
https://www.youtube.com/watch?v=bSGs4oRkiFs

sixtiescycle · Post by **sixtiescycle** » Tue Mar 29, 2016 12:41 am

Nice job Steve! It's a beauty for sure. You need to bring it to Corvallis in May.

See you Friday? I'll be in the same space as last year, 9227.

Steverino · Post by **Steverino** » Tue Mar 29, 2016 9:40 am

Friday Morning. I have been looking forward to it all winter.

Honda305.com Forum

Steverino's CB77

NOS Tappet Screws Pictures

Re: NOS Tappet Screws Pictures

Thanks Again Loud Mouse

Re: Thanks Again Loud Mouse

Valves finally set properly video.