Steering damper

SMBH · Post by **SMBH** » Fri Feb 07, 2014 2:15 pm

Will the CL77 steering damper fit a CB77

The steering damper that was in the race kit that fits to the top engine bolt and the lower forks NOT THE SCREW DOWN ONE.

G-Man · Post by **G-Man** » Fri Feb 07, 2014 2:44 pm

Yes - it's listed in the CYB race kit. Same thing.

You need the stud for the fork yoke and the modified top engine hanger bolt. Pretty expensive that one.

G

SMBH · Post by **SMBH** » Fri Feb 07, 2014 3:04 pm

Thanks mate, I have only been on this forum a short time to know you are the man.

Im leaving my Dolly Parton (top half) photo collection to you in my will.

G-Man · Post by **G-Man** » Fri Feb 07, 2014 3:18 pm

You're welcome. I'll probably pass on the Dolly collection, though :-)

The special bolt and stud occasionally come up as a kit on eBay. CL dampers come up and can be expensive but if you are patient you'll get one. The rubber shroud gets perished but you can get new ones here.....

http://www.claussstudios.com/id45.html

All of their parts are great quality.

G

Dgormley · Post by **Dgormley** » Sun Feb 09, 2014 6:04 pm

SMBH, I have a workable damper off of one of my CL frames that's yours for postage( and a pint or two if I'm ever in your neck of the woods) ........................D