Need CL72 cushion dampener shock please!

mips · Post by **mips** » Sat Aug 17, 2013 9:03 am

I got both taken apart for painting, one doesn't seem to have any dampenening. I need the shock body. Anyone have a spare?

Scram64 · Post by **Scram64** » Sat Aug 17, 2013 1:59 pm

Mips, No compression dampening or rebound dampening? Ask around, but they had little to no compression dampening. Correct me if I'm wrong. You looking for a eye to clevis shock body ? Scram64

mips · Post by **mips** » Sat Aug 17, 2013 3:00 pm

I got it apart, it had run out of fluid. I can't seem to find the seal it takes anywhere online. Has been referenced as a 27.2 x 9 x 10. Looking for half an hour with no luck

Scram64 · Post by **Scram64** » Sat Aug 17, 2013 3:42 pm

Mips, PM G-man direct. He might have a source for that seal.

mips · Post by **mips** » Sat Aug 17, 2013 6:03 pm

Finally found it!! Didn't realize the ones people are using as replacement are slighly smaller 26.4 instead of 27.2.

G-Man · Post by **G-Man** » Sun Aug 18, 2013 11:22 am

Not sure that the 26.4 seal will work in there but interesting to find out. I made up a seal holder and used a smaller seal.

CL77- 10mm New Seal Holder 2 by graham.curtis, on Flickr

G

mips · Post by **mips** » Mon Aug 26, 2013 11:20 am

Shoot! I was hoping it would be a direct fit.

Anyone have any CL72 shocks that hold oil still? I have the other parts, just need the lower dampner part.