Put Tappet Adjust Screw Through Tappet Cover

skisurf · Post by **skisurf** » Mon May 14, 2012 10:07 pm

Has anyone else ever put a tappet adjuster screw through the tappet cover. Made a nice hole before I noticed it.

Where can I purchase new tappet adjuster screws?

G-Man · Post by **G-Man** » Tue May 15, 2012 2:56 am

How did you achieve that?

It must have been way out of adjustment and clattering loudly unless you had an extra-long adjuster screw in there......

Pictures, please.

G

Mike Mullins · Post by **Mike Mullins** » Tue May 15, 2012 10:52 pm

I would give Western Hills Honda, or Ohio Cycle a try. I pulled an engine apart once that had marks on the inside of the tappet covers from one of the screws hitting it. Yeah, I can see how it would happen.
Mike

LOUD MOUSE · Post by **LOUD MOUSE** » Thu May 17, 2012 4:36 pm

This happens when ya adjust the cams when the lobs are not at the correct "T" or "LT". ........lm

G-Man wrote:How did you achieve that?

It must have been way out of adjustment and clattering loudly unless you had an extra-long adjuster screw in there......

Pictures, please.

G

Honda305.com Forum

Put Tappet Adjust Screw Through Tappet Cover

Put Tappet Adjust Screw Through Tappet Cover

re: