Another new guy restoring a 67 CB77

Superchicken · Post by **Superchicken** » Mon Nov 21, 2011 2:20 pm

Yes those numbers are a good match for a 63

burnite2 · Post by **burnite2** » Mon Nov 21, 2011 2:28 pm

Thanks superchicken and cliffc for the date.
The PO had it titled as a 67 and got a front fender for a 67 that doesnt fit the early forks.
Now the search for an early fender.

davomoto · Post by **davomoto** » Mon Nov 21, 2011 2:57 pm

I had the same issue with front fenders. I put an ad on local craigslist, and found a guy that had the fender I needed, and needed the fender I had. I made a good friend in the process as well. You can also post in the parts wanted section, and see if anyone wants to do a swap.

Davo

Jethro · Post by **Jethro** » Mon Nov 21, 2011 7:20 pm

Hey...
I sure could use one of those late fenders for my resto if you're wanting to part with it.
I'll even throw in some gratituted along with some $.

Let me know.

Thanks,
Jethro

burnite2 · Post by **burnite2** » Tue Nov 22, 2011 6:36 pm

I'll let you know. As of right now i'm going to keep it untill i can find the right one.
Unless you have an early fender you would like to trade.

jeremy

burnite2 · Post by **burnite2** » Sat Nov 26, 2011 4:59 pm

I went on the last ride on Thanksgiving until spring time, now the teardown begins.
If anyone has an early front fender that they would like to trade for a later one,
or sell an early fender let me know. The bike looks good. I could only find a few things wrong,
the rear fender mount by the batt. tray is broken off, a few striped out screw heads, and stud holes
that needs to be helicoiled back to metric size and not SAE. One question i had was about the badges, are these the correct ones?

davomoto · Post by **davomoto** » Sat Nov 26, 2011 5:18 pm

They're factory Honda replacement badges, that you can still order from Honda. The origionals were plastic. Ray sells them for around $60 with 4 new screws. Here's his e-mail. RRHByrne@aol.com

Davo