pistons

bsa lover · Post by **bsa lover** » Fri Sep 09, 2011 12:58 am

I have to bore my CL-250, looks like its going to be 1mm over or more, if the prevouis bore wasn't done right, then more, how much over can i safely go and are there any ca or cl pistons in the 1mm and over, looking on e bay 1mm seems to be about it

Hahnda · Post by **Hahnda** » Fri Sep 09, 2011 8:35 am

You have a CL72 and you are looking for 1mm or more oversized pistons and rings. I might be able to help you out. I have some that are 3mm oversize I think. I also have some that aren't oversized as much as that.

wmcfrazier · Post by **wmcfrazier** » Wed Oct 19, 2011 10:21 pm

Kevin, My CL77 is 1mm over and I am looking for new pistons and rings. What do you have and what is the mfgr. Your post says 2.5mm over ?

Bill