honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

fine wires or not

Clutch, Transmission, Drive Chain, Sprockets
dppeter
honda305.com Member
Posts: 48
Joined: Tue May 30, 2006 4:19 pm
Location: iowa

Post by dppeter » Thu Sep 28, 2006 7:36 am

Great tips - thank you! I just rebuilt an engine on a bike I've been restoring and I've had all the clutch problems I've been reading about here (clutch will not release the engine). It's been a few years since I worked on these engines so I've been racking my brains out to figure out the problem. I finally realized it had to be the clutch disks sticking - even though I cleaned and scuffed them when I put it together. Maybe I scuffed them up to much. 20-25 years ago when I worked on these bikes, I would pick one up with a "stuck" clutch and end up taking the plates apart and lightly sanding them. It always worked back then but not this time. Anyway, I'll change things out with one of the other clutch assemblys I have and give it another try. Thanks again for the information!

Post Reply




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home