Dynamo Cover Screw

mooney1el · Post by **mooney1el** » Sun Jul 04, 2010 8:38 am

While cleaning up my '67 Scrambler after its 36 year slumber, I had to drill out one of the dynamo cover screws, not thinking that it might be "something different". I thought it was a regular 5mm but apparently not.

Anyway, does anybody have a spare in decent shape?

Thanks,

Richard

cbxmountainman · Post by **cbxmountainman** » Sun Jul 04, 2010 10:22 am

I may have the three you need (NOS) I got from Honda. If I can think of it, I'll check in a couple of days to make sure. Charlie

e3steve · Post by **e3steve** » Sun Jul 04, 2010 1:41 pm

mooney1el wrote:While cleaning up my '67 Scrambler after its 36 year slumber, I had to drill out one of the dynamo cover screws, not thinking that it might be "something different". I thought it was a regular 5mm but apparently not.

5mm JIS, not M5 ISO. If Charlie draws a blank then try Fast Fred.

mooney1el · Post by **mooney1el** » Sun Jul 04, 2010 4:15 pm

Thanks Guys, I will try Fast Fred after Charlie has a couple of days to "remember" :)

eamartin · Post by **eamartin** » Thu Mar 03, 2016 9:47 am

Late CA77 (CA78), dynamo cover screw as described (5mm, .9 pitch, 12mm length, oval head with beveled shoulder). Any suggestions on where to begin sourcing this? Most postings on this topic are pretty old. Any current input would be appreciated. I'll use the old screw rather than tap but I'd cut off a longer screw if I could find a nice one. Thanks, Mike

G-Man · Post by **G-Man** » Fri Mar 04, 2016 1:32 pm

http://www.mrmegapack.co.uk/philips-rai ... 0186-p.asp

G

revlover · Post by **revlover** » Fri Mar 04, 2016 3:31 pm

https://www.davidsilverspares.com/CB77-305/part_43594/

These may be the same also, although not listed for the dream.

Honda305.com Forum

Dynamo Cover Screw

Dynamo Cover Screw

Screws

Re: Dynamo Cover Screw

Dynamo cover screw 5mm, .90 pitch, 12mm long