Connecting Rod Supplier

[Ralphie1]

Does anyone know where I can get a set of new con rods and bearings for a 1966 Honda 305 Dream

[G-Man]

They come up on eBay but complete cranks also do from time to time.

http://cgi.ebay.com/ebaymotors/Honda-C7 ... ccessories

David Silver in the UK has brand new Dream Cranks at £250.

http://www.davidsilverspares.co.uk/

Good luck

G

[LOUD MOUSE]

Did ya see the big end bearings aren't with the rods?
I have the assy but not cheap for sure. ...........lm

They come up on eBay but complete cranks also do from time to time.

http://cgi.ebay.com/ebaymotors/Honda-C7 ... ccessories

David Silver in the UK has brand new Dream Cranks at £250.

http://www.davidsilverspares.co.uk/

Good luck

G

[G-Man]

Lm

Yes, but I have seen some with bearings occasionally.

G

[LOUD MOUSE]

Yes ya will but those don't have them as mine do. ...........lm

Lm

Yes, but I have seen some with bearings occasionally.

G

[Ralphie1]

[quote="LOUD MOUSE"]Did ya see the big end bearings aren't with the rods?
I have the assy but not cheap for sure. ...........lm

You're right I can well imagine how expensive those brgs are...I got the crank down to the shop this am so they will let me know re their condition

[teazer]

LM are your big end bearings single rollers or the same pairs as OEM? I have some brass cages in stock somewhere. I got a pile of them and a couple of crank webs from a dealer who was closing.

What I don't have are light cages with single rollers.

We also discovered that stock Honda rollers often have sharp ends which cut into the cages causing cage cracking. We used to take every roller and relieve the ends by chamfering the corners slightly.