Turn Signals, anyone tried this:

Kirk · Post by **Kirk** » Thu Oct 09, 2008 5:01 pm

Sorry Esteve wrong link

http://cgi.ebay.com/ebaymotors/_Motorcy ... rms=39%3A1

best wishes,
Kirk

Kirk · Post by **Kirk** » Thu Oct 09, 2008 6:00 pm

How about this one

http://cgi.ebay.com/ebaymotors/Parts-Ac ... 06.c0.m245

Best Wishes,
Kirk

e3steve · Post by **e3steve** » Fri Oct 10, 2008 1:37 am

Hey Kirk, the first is a l/h assy, so no good for our range of bikes. The second incorporates a mirror threading and, possibly (can't see from this angle), a lever perch. The size of the throttle cave looks wrong too.

I wouldn't waste my money there.

Kirk · Post by **Kirk** » Fri Oct 10, 2008 12:34 pm

Thanks,
Kirk

awineke · Post by **awineke** » Thu Oct 23, 2008 5:00 pm

Just FYI, this looks like the same kit as the original post for $12 less:

http://www.dratv.com/fowhtusikita.html

I'm probably going to do this for my CL77 sometime.

e3steve · Post by **e3steve** » Sat Oct 25, 2008 3:22 pm

You CL guys wouldn't need the starter button, so you could either use the lower half of the assy from your existing throttle cave or you could, with a relay, wire in a headlamp flasher button.

Sorry, my balls-up above! You can't use the lower half from another; the CP winker switch is about 12mm wider. I was being a twat -- again.....