Correct seat strap mounting

[bk305]

my 1963 cb77 had a spring steel reinforcing strap inserted into the hold down fabric for strength? and/or form. when i recovered my seat with the replacement cover and strap, i found using new banding strapping for the new insert to work perfect. i also used new ss bolts and nuts to finish the job. (now if i can just get the chrome seat trim finished i'll be all set)! - bk

[ekim]

My seat on my 67 cb77 appears to be a stock seat and the strap folds under the seat and there are 2 bolts welded to the inside edges of the seat pan, but my seat flares up at the front by the tank, not flat like the picture posted above.

[AWILLIAMS64]

my seat has the lift at the front as well. like i said i have 2 bolts into the pan but they are broken off.

My seat on my 67 cb77 appears to be a stock seat and the strap folds under the seat and there are 2 bolts welded to the inside edges of the seat pan, but my seat flares up at the front by the tank, not flat like the picture posted above.

[LOUD MOUSE]

The strap wraps around the bottom edge of the seat then the threads pass through a hole in the strap and you can hold it there with a flat washer, lock washer and 10mm nut. .............lm

my seat has the lift at the front as well. like i said i have 2 bolts into the pan but they are broken off.

My seat on my 67 cb77 appears to be a stock seat and the strap folds under the seat and there are 2 bolts welded to the inside edges of the seat pan, but my seat flares up at the front by the tank, not flat like the picture posted above.

[AWILLIAMS64]

oh ok, so thats why i can not find any kind of "buckle" for the strap. I will get out the trusty drill and tap, and maybe try to get some allthread to replace it or maybe a short bolt.