Cable Routing

wordman5 · Post by **wordman5** » Tue Mar 04, 2008 11:53 pm

I apologize if this question is in a thread elsewhere -- I've looked and don't remember seeing the topic covered.
Would it be possible for someone to either describe correct cable routing, or photograph their machine with correctly routed cables without the tank?
My machine is a 1966 CB77 that I've equipped with the low bars.
Thanks!

davomoto · Post by **davomoto** » Thu Mar 06, 2008 3:50 pm

I just happened to have the tank off of my CB77 Cafe' bike. Clutch cable goes above the tank rubber when tank is installed. I hope these pics help.

davomoto

LOUD MOUSE · Post by **LOUD MOUSE** » Thu Mar 06, 2008 4:00 pm

The throttle cable goes to the right of the steering stem and under the frame beam and over the coils. ...............lm

davomoto wrote:I just happened to have the tank off of my CB77 Cafe' bike. Clutch cable goes above the tank rubber when tank is installed. I hope these pics help.

davomoto

davomoto · Post by **davomoto** » Thu Mar 06, 2008 4:18 pm

Thanks LM.

davomoto

wordman5 · Post by **wordman5** » Thu Mar 06, 2008 7:02 pm

Thanks guys. Just wanted to make sure it's 'correct'. I was on the right track! I'm making some progress on this resto and there really isn't that much left to be done -- wire harness, pipes and mufflers, putting the headlight back in place.
The only challenge is being a paraplegic and working from a wheelchair -- sometimes it's the easy things that can be a stumbling block!
This is my first resto after my bike accident of Oct. 2, 2004.

davomoto · Post by **davomoto** » Fri Mar 07, 2008 2:13 pm

Sweet ride wordman! Keep up the excellent work.

davomoto

Dogsbd · Post by **Dogsbd** » Sat Mar 08, 2008 9:49 am

She looks awesome Workman! Keep us updated with more pictures.