Sprocket Starting Motor Circlip

tazoutlaw · Post by **tazoutlaw** » Mon Oct 03, 2011 12:26 am

What size is the circlip and or where can i find one??

48lesco · Post by **48lesco** » Mon Oct 03, 2011 8:16 am

13mm supercedes to 94510-13000. Retails for 62 cents at your Honda dealer.

tazoutlaw · Post by **tazoutlaw** » Mon Oct 03, 2011 8:54 am

Thanks, I will check the local Honda dealers, for some reason I was think they would not carry this anymore.... once again thank you.

48lesco · Post by **48lesco** » Mon Oct 03, 2011 9:50 am

You would be surprised what you can still get brand new from Honda. Mostly hardware, gaskets, seals, etc. There are even folks out there who sell these "vintage" "NOS" parts on ebay for 5x retail. Do your homework - always check with Honda first. BTW - That is one great looking early Dream!

tazoutlaw · Post by **tazoutlaw** » Wed Oct 05, 2011 11:56 am

Thanks for your help, I have order a seal kit from ebay, waiting for it, I will keep the forum posted...

tazoutlaw · Post by **tazoutlaw** » Wed Oct 12, 2011 8:47 am

Lesco, I have tried all local dealers in my area no luck with that 13 mm circlip, I had to use a inside circlip which does not sit right, put holds it in place for now.

Thanks to the forum It has made it easy to work on my 65 Honda CA77, I have replaced all the seals on the kick starter side, It no longer as any oil leaks, Also learned these Dreams have sticky clutch plates, when engine is cold or been sitting for a very long time. So my next step is to replace or clean the clutch plates. Mean while I would be riding it before the winter begins. Also in need for two white walls if anyone has or know where to find, attach our a few photos of the 65 Honda Dream CA77 305….lol lol.

Honda305.com Forum

Sprocket Starting Motor Circlip

Sprocket Starting Motor Circlip

13mm circlip