305cc piston and valve question

denfam4 · Post by **denfam4** » Sat Oct 25, 2008 9:30 am

Are all 305cc pistons and valves the same by model (ie. CB, CL, CA) and/or year?

Thanks, Ray

LOUD MOUSE · Post by **LOUD MOUSE** » Sat Oct 25, 2008 10:20 am

The CB/CL77 305 pistons and valves are the same.
The C/CA77 DREAM uses a different piston and both valves are different from the CB/CL77. ............lm

denfam4 wrote:Are all 305cc pistons and valves the same by model (ie. CB, CL, CA) and/or year?

Thanks, Ray

denfam4 · Post by **denfam4** » Sat Oct 25, 2008 1:56 pm

Great...how would I tell? I bought a bunch of parts and while I have most all of the boxes the parts are out of them...

LOUD MOUSE · Post by **LOUD MOUSE** » Sat Oct 25, 2008 4:16 pm

Original HONDA pistons have CB77 on them and the others may have CA77.
The CA77 pistons are full Hemi without the edge machined in about 1/8 inch. ...............lm

denfam4 wrote:Great...how would I tell? I bought a bunch of parts and while I have most all of the boxes the parts are out of them...

rrietman · Post by **rrietman** » Fri Nov 14, 2008 9:17 pm

Anybody had an troubles using dream pistons/cylinder on a CL77 engine? I have heard that it will actually raise the CR a bit, but how about piston/valve/head clearances?
Thanks
Randy

LOUD MOUSE · Post by **LOUD MOUSE** » Sat Nov 15, 2008 12:48 am

Will work and won't have any problems. ..................lm

rrietman wrote:Anybody had an troubles using dream pistons/cylinder on a CL77 engine? I have heard that it will actually raise the CR a bit, but how about piston/valve/head clearances?
Thanks
Randy

Honda305.com Forum

305cc piston and valve question

305cc piston and valve question

Re: 305cc piston and valve question

dream pistons

Re: dream pistons