Dianne's C77
I had the lower end back together while waiting for parts so when the seals came in, it was down to work.

Rings on, pistons back in the cylinders, and with the head on, it was time to set the cam timing.

When you are one old woman alone in the shop, hanging an engine is a P.I.T.A.!!! But it got done with only minor swearing ;)

Brake pedal, foot rests, exhausts, tank, etc. back on and it was time for the acid test.
http://s163.photobucket.com/user/dianne ... n.mp4.html
Have yet to test the clutch and brakes but what the heck - that's what an antique motorcycle gathering is for! ;)

Rings on, pistons back in the cylinders, and with the head on, it was time to set the cam timing.

When you are one old woman alone in the shop, hanging an engine is a P.I.T.A.!!! But it got done with only minor swearing ;)

Brake pedal, foot rests, exhausts, tank, etc. back on and it was time for the acid test.
http://s163.photobucket.com/user/dianne ... n.mp4.html
Have yet to test the clutch and brakes but what the heck - that's what an antique motorcycle gathering is for! ;)
Top job!
Enjoy your day out.
G
Enjoy your day out.
G
DianneB wrote:I had the lower end back together while waiting for parts so when the seals came in, it was down to work.
Rings on, pistons back in the cylinders, and with the head on, it was time to set the cam timing.
When you are one old woman alone in the shop, hanging an engine is a P.I.T.A.!!! But it got done with only minor swearing ;)
Brake pedal, foot rests, exhausts, tank, etc. back on and it was time for the acid test.
http://s163.photobucket.com/user/dianne ... n.mp4.html
Have yet to test the clutch and brakes but what the heck - that's what an antique motorcycle gathering is for! ;)
'60 C77 '60 C72 '62 C72 Dream '63 CL72
'61 CB72 '64 CB77 '65 CB160
'66 Matchless 350 '67 CL77
'67 S90 '77 CB400F
'61 CB72 '64 CB77 '65 CB160
'66 Matchless 350 '67 CL77
'67 S90 '77 CB400F
No I haven't - it is still doing the same as before the overhaul.sarals wrote:Have you made any progress on the kickstart mystery?
I suspect that the low gear (with the kickstart ratchet) isn't engaging properly but haven't had a chance to investigate any further. I also lost my neutral light when I did the overhaul so I have to trace that down as well - probably missed an electrical connection in the rush.