WTB - CB160 motor part "knock pin"

Husbyb86 · Post by **Husbyb86** » Sun Mar 30, 2014 11:21 am

I've got my cases split in front of me, and I'm missing a small, but important component that keeps one of the main crankshaft bearings in place. It's a little "knock pin" that presses into the upper crankcase, in between one of the main crankshaft bearings, and crankcase bearing retainer. See the picture.

Part number is 90701-222-000. Parts fiche calls it a "knock pin" with 6x12.5 dimensions. I can't seem to find it anywhere online or at the dealer.

HELP! Oh, and thanks.

http://i.imgur.com/XMoMprf.jpg?1

Tinman · Post by **Tinman** » Sun Mar 30, 2014 1:13 pm

I don't know if the knock pin you're looking for is stepped or not, I suspect not as the measurements you gave are 6x12. But you can find a knock pin for a KZ1000 that measures 6x14mm and cut it down with a dremel cutoff wheel. There are several for sale on ebay.

rrietman · Post by **rrietman** » Sun Mar 30, 2014 10:34 pm

H; I have a bunch of cb160 engines apart, I'm sure I can find what you need. I'll be at the mt Vernon meeting this month and can pass it along to Ray.
Thanks
Randy

Husbyb86 · Post by **Husbyb86** » Mon Mar 31, 2014 11:00 am

Cool! Thanks Randy. I'm glad you discovered me on here. I may be bugging you for more parts in the future. -Brandon