Wanted! Right side crankcase cover

block · Post by **block** » Mon Sep 28, 2009 9:59 pm

One too many kickstarts has left my crankcase cover with a good size crack on my superhawk. If anyone has one to fit a cb77 that they are willing to part with, please let me know.

chico · Post by **chico** » Thu Oct 01, 2009 6:10 am

Block, how bad is the crack? It can't be welded and refinished? I have one that has a hairline crack that I was going to weld and polish up outside and web weld inside to reinforce around kick hole. Just a thought.

block · Post by **block** » Thu Oct 01, 2009 3:26 pm

well, I guess I got some kick in my leg! That and a lot of no starts while trying to get this thing roadworthy. I did JBweld it back together as an experiment and got my clutch back. Sure isn't kick worthy though. Hopefully I can get it going reliably enough that no kicking would not be an issue.

chico · Post by **chico** » Sat Oct 03, 2009 10:39 pm

That's looks a little more than a good sized crack, looks like it's history. I have one that has a crack that you would have to know where it was to find it, it's that fine of a crack. Like I said in previous post it can be electric welded and finished off on the outside and spider welded inside and if you have a starter working should'nt have to kick it. I'll post a pic tomorrow.

block · Post by **block** » Sun Oct 04, 2009 7:28 am

Sounds good Chico. I'll wait for your pic's.

chico · Post by **chico** » Sun Oct 04, 2009 8:16 am

Hi Block, heres the pics, crack is between arrows. camera not real good. I think this one can be saved if you know anyone who can weld alluminum.

block · Post by **block** » Sun Oct 04, 2009 10:26 am

Doesn't look bad at all. please send me an email in regards to what you want for it, etc.

mr.eric.block@gmail.com

Honda305.com Forum

honda305.com Forum

Wanted! Right side crankcase cover

Wanted! Right side crankcase cover

Kick cover

kicker case

kicker pics