ca95 petcock bolts and plate

3BeanCrispy · Post by **3BeanCrispy** » Fri Jul 03, 2009 2:09 pm

trying to find some 5mm bolts for ca95 petcock. also need a spring plate if anyone has one to part with. may try to rig in a conical spring washer to fill the need for tension on the plate. i have the plate, but all 4 'tangs' were broken off. thanks !

matt in PA

joeweir1 · Post by **joeweir1** » Fri Jul 03, 2009 8:06 pm

Bean-I got some 5mm from a Honda dealer I believe for my CA77 petcock.Not sure what to tell you about the spring plate.Joe in PA also

3BeanCrispy · Post by **3BeanCrispy** » Fri Jul 03, 2009 9:25 pm

when i look at cmsnl ca77 parts diagram it's showing 6mm. the ca95 is , unfortunately, 5mm. doesnt look like theres enough clearance/sidewall to take it out to 6 either.
hmm ... looks like cmsnl may have the 5mm's ... lol.
thanks for the reply !

joeweir1 · Post by **joeweir1** » Sat Jul 04, 2009 6:48 am

Sorry about that, been a few years since I got them and I now I recall finding a 6mm tap to clean out the threads .You could still try the dealer for some.Joe