Early CA95 Parts Needed

bill440cars · Post by **bill440cars** » Thu Apr 17, 2008 11:13 pm

Okay, I know this isn't about 250 or 305 bikes, but I've got a buddy in the UK, who is in need of a couple of camshafts and also a couple of tach drive setups. Any input would be appreciated and I'll pass it right along.

Thanks, Bill

dppeter · Post by **dppeter** » Fri Apr 18, 2008 8:47 pm

Did the CA95 have a Tachometer?

Hahnda · Post by **Hahnda** » Sat Apr 19, 2008 8:03 am

dppeter wrote:Did the CA95 have a Tachometer?

the early ones had a drive for one off the cam. They didn't actually run a tach though. The drive was a carry over from the CB92 I think?

bill440cars · Post by **bill440cars** » Sat Apr 19, 2008 1:46 pm

Hahnda wrote:
dppeter wrote:Did the CA95 have a Tachometer?
the early ones had a drive for one off the cam. They didn't actually run a tach though. The drive was a carry over from the CB92 I think?

I don't really know that much about them. Kevin, it's Sam, over on SOHC4 that needs the parts. Got any idea where he might get them? I'm just trying to help him locate what he needs.

Take care, Bill

Hahnda · Post by **Hahnda** » Mon Apr 21, 2008 3:24 pm

I have them but I'm not all that ready to give it up. He's tried.

bill440cars · Post by **bill440cars** » Tue Apr 22, 2008 7:45 pm

Hahnda wrote:I have them but I'm not all that ready to give it up. He's tried.

Kevin, I'm not surprised about that! Those parts must be pretty scarce. He put a post over on the Twins site and I thought I'd check over here for him.

Take care, Bill