Dream Voltmeter

Crispy1 · Post by **Crispy1** » Sun Jan 11, 2015 12:04 pm

Thanks! I'm new here and just getting to know my '64 CB77. While riding around last summer, I found myself flipping my light switch around to change charging rates and I thought to myself, "self, get a little digital readout so you can see what's going on". Good job Cadman, C.

bbap · Post by **bbap** » Sat Jun 13, 2015 11:00 am

Cadman, what wires did you connect it to so that it is not pulling voltage when the bike was not running? Thanks! Steve

cadman wrote:It cost about $8 - Here is a link for it .

I made the bracket from aluminum stock.

http://www.banggood.com/Automobile-Moto ... AtEF8P8HAQ

cadman · Post by **cadman** » Sat Jun 13, 2015 8:37 pm

The hot lead to the horn.

bbap · Post by **bbap** » Sun Jun 14, 2015 1:47 pm

Many thanks, works great. Hopefully, no further events at the stop light when the low voltage created a stall and very difficult restart. Steve D