honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

Access cover missing on a '66

Post Reply
byrdman76
honda305.com Member
Posts: 96
Joined: Fri Feb 29, 2008 10:12 pm
Location: North Carolina

Access cover missing on a '66

Post by byrdman76 » Fri Feb 27, 2009 11:35 pm

I was noticing that other Dreams have a what seems to be a clutch cable access on the engine side cover. My '66 doesn't have one - any one know why this was changed?

Image

eyedragaknee
honda305.com Member
Posts: 131
Joined: Thu Jul 31, 2008 12:49 pm
Location: NC
Contact:

side cover

Post by eyedragaknee » Sat Feb 28, 2009 8:04 am

I might have one if you decide to replace it.

byrdman76
honda305.com Member
Posts: 96
Joined: Fri Feb 29, 2008 10:12 pm
Location: North Carolina

Post by byrdman76 » Sun Mar 01, 2009 11:31 pm

Thanks Joe - I was just looking to find out why they decided to remove it on this model.

Buck
honda305.com Member
Posts: 111
Joined: Wed May 31, 2006 7:37 pm
Location: Dalton,Georgia

Post by Buck » Mon Mar 02, 2009 2:43 pm

Early CA models had clutch cable coming thru right side cover. Mid 60's and later had cable like yours.

georgeorge
honda305.com Member
Posts: 6
Joined: Tue Mar 24, 2009 7:52 pm

Post by georgeorge » Wed Apr 01, 2009 7:23 am

Byrdman's right... his is different. mine is different than his anyway. My cable enters the case in the same spot, but he means that his has no rubber cap just above the grease nipple. Mine has a rubber cap about an inch in diameter just above the grease nipple. hmm...

albano.martins
honda305.com Member
Posts: 34
Joined: Sun May 11, 2008 9:09 am
Location: Maia, Portugal

Clutch cable

Post by albano.martins » Wed Apr 01, 2009 9:17 am

Hi byrdman76!

I have a doubt in your dream clutch cable.

I would like to know, why did you put the clutch cable outside the fuel tank, because in my c77 n c72 i put them inside.

I know in ca95 to replace a clutch cable, you had an access, a case (left side), that made the clutch cable replacement easier, without disassembling the side cover.

Byrdman's right... his is different. mine is different than his anyway. My cable enters the case in the same spot, but he means that his has no rubber cap just above the grease nipple. Mine has a rubber cap about an inch in diameter just above the grease nipple. hmm...
By the way, if you guys had a picture of the old arly CA models with the clutch cable coming through right side cover, just to see.

Thanks,

Albano Martins

Post Reply




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home