screw size and pitch

[benlyboy]

Hi all
This is my first post on your very interesting forum.
So I'll take a line or two to introduce myself, im the owner of two vintage Honda’s my first a C92 Benly(rear over here i believe) i got about 20 years ago, it was a real basket case. With life getting in the way it took about 17 years to finally get it back on the road a couple of years ago. My new project is a C77 Superhawk. it isn’t in as bad a shape as the c92 was but is still a big job as someone had tried to turn it into a chopper. I’ve had to find and replace everything forward of the steering head on the frame, as well as the tank and rear guard. ok enough lol

My question is can someone tell me what the screw is that holds the knob on the light switch on the headlight? I have the switch and the knob but no screw.

thanks for any help :-)

[DJM]

It's a thin bolt which screws into the spindle of the lighting switch. Part number is 35154 268 000 and it still seems to be available, at least it's listed on CMS website at two Euros.

You might struggle to find anything else to fit as it will be the old JIS Spec thread.

BTW, Where is 'over here'?

[benlyboy]

Hi DJM

Thanks for the part number that helps a lot.

By over here I meant the US, I'm originally from New Zealand and brought my little benly with me. From what i can tell the 125cc C92 is not very common over here, most are the 150cc CA95.

Thanks again for the help

[Adam2]

Thanks for the help.