honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

4 cheap(er) restoration tricks I found along the way

bigscooter
honda305.com Member
Posts: 149
Joined: Sat Aug 25, 2007 5:17 pm
Location: oregon

Post by bigscooter » Fri May 30, 2008 11:50 pm

i used a heat sink from an old computer. any backyard computer guy will have a bucket of them.
he'll probably just give one to you.
Image

britman
honda305.com Member
Posts: 175
Joined: Fri Dec 14, 2007 3:23 pm
Location: Virginia

Just FYI

Post by britman » Wed Feb 11, 2009 12:32 pm

Napa part number 8803 is a upper radiator hose for a 1993-1998 Lincoln Mark VIII. I am going to give my old breather hoses some time with a gentle heat gun and if they don't soften, I may give this tip a try. BTW, the Lincoln hoses are about $15.00 each.

slopokecr
honda305.com Member
Posts: 55
Joined: Fri Dec 26, 2008 8:27 pm
Location: Honolulu

Post by slopokecr » Wed Feb 11, 2009 6:47 pm

I posted this a while back in another section, but thought I would repost.
I used "Marine Tex Flex Set" to repair my old hose. It is a 2 part epoxy that dries flexible.(I used to use it when repairing zodiacs). I used crazy glue to temporarily hold in place, then covered with the Marine Tex. Available at West Marine. You can even sand and paint if you want.

skos
honda305.com Member
Posts: 12
Joined: Wed Feb 04, 2009 8:49 pm

Post by skos » Fri Feb 13, 2009 11:31 pm

I love this forum!!

I am with you guys. I would rather replace a bad part with a better one. +1 on all upgrades to at least 2010 standards

Post Reply




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home