honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

clutch plates cb77

Clutch, Transmission, Drive Chain, Sprockets
Post Reply
kawonda750
honda305.com Member
Posts: 42
Joined: Mon Dec 04, 2017 5:27 pm
Location: Ontario Canada

clutch plates cb77

Post by kawonda750 » Sun Feb 18, 2018 12:14 pm

Engine number CB77E 1052391

There were 5 steels and friction plates on this bike. There were no little rings which I see in the parts diagram. 22431 259 000.

I saw a clutch set on ebay that shows 5 steels and plates. Is this correct? Do I need the little rings? Do I need more plates?

LOUD MOUSE
honda305.com Member
Posts: 7817
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Re: clutch plates cb77

Post by LOUD MOUSE » Sun Feb 18, 2018 2:09 pm

I'd say ya have a 1966 bike and it came with the Cush Drive clutch.
4 of the steel should have cut out in the center circle to lessen warping.
The friction disc should be aluminum with black neoprene contact area.
If I'm correct all ya should need to do is clean/wash the parts.
Wire wheel clean the steel plates, use parts cleaner (not carb cleaner) on all the parts.
Don't worry about the missing wires unless you want to.
Any questions call me at 830-895-0654. ......................lm

kawonda750 wrote:Engine number CB77E 1052391

There were 5 steels and friction plates on this bike. There were no little rings which I see in the parts diagram. 22431 259 000.

I saw a clutch set on ebay that shows 5 steels and plates. Is this correct? Do I need the little rings? Do I need more plates?

kawonda750
honda305.com Member
Posts: 42
Joined: Mon Dec 04, 2017 5:27 pm
Location: Ontario Canada

clutch

Post by kawonda750 » Sun Feb 18, 2018 2:18 pm

Thanks LM

LOUD MOUSE
honda305.com Member
Posts: 7817
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Re: clutch

Post by LOUD MOUSE » Sun Feb 18, 2018 2:19 pm

You are welcome. ....................lm
kawonda750 wrote:Thanks LM

Bee
honda305.com Member
Posts: 34
Joined: Mon Jul 01, 2013 9:58 pm
Location: Helena, MT

Post by Bee » Thu Jul 05, 2018 9:26 pm

Say LM I am curious what you recommend as parts cleaner? I asked around at several parts places today and they looked at me like I was crazy. One guy suggested Sea Foam.

Bee
honda305.com Member
Posts: 34
Joined: Mon Jul 01, 2013 9:58 pm
Location: Helena, MT

Post by Bee » Thu Jul 05, 2018 9:27 pm

Say LM I am curious what you recommend as parts cleaner? I asked around at several parts places today and they looked at me like I was crazy. One guy suggested Sea Foam.

LOUD MOUSE
honda305.com Member
Posts: 7817
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Post by LOUD MOUSE » Fri Jul 06, 2018 7:08 am

I use carburetor cleaner that comes in a 5 gallon can.
Not cheap but works for a long time. ………….lm

Bee wrote:Say LM I am curious what you recommend as parts cleaner? I asked around at several parts places today and they looked at me like I was crazy. One guy suggested Sea Foam.

Post Reply
cron




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home