honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

Shift Fork assembly

Clutch, Transmission, Drive Chain, Sprockets
Post Reply
lhz55
honda305.com Member
Posts: 29
Joined: Thu May 22, 2008 9:58 am
Location: Myrtle Beach, SC

Shift Fork assembly

Post by lhz55 » Fri Jul 18, 2008 9:39 pm

Upon reassembly, The shift fork end does not stick out enough through the side cover for the foot pedal linkage to fully slide back on.
Is there something I can do to adjust this?
Thanks, Lee

User avatar
davomoto
honda305.com Member
Posts: 2508
Joined: Sat Nov 18, 2006 7:36 pm
Location: Marin County CA

Post by davomoto » Sat Jul 19, 2008 11:53 am

Lee, how far is it off? There is no adjusment, it sits flush in the center case. Is the seal flush with the clutch cover? Is the clutch cover seated against center case? They do slide in and out a bit, but I've never run in to this problem.

davomoto

jwbert
honda305.com Member
Posts: 89
Joined: Wed Jan 05, 2005 5:47 pm
Location: McFarland, WI

Post by jwbert » Mon Jul 21, 2008 7:01 pm

Is the seal in the side case fully seated? It should be flush with the metal of the sidecover. JWB

lhz55
honda305.com Member
Posts: 29
Joined: Thu May 22, 2008 9:58 am
Location: Myrtle Beach, SC

Post by lhz55 » Tue Jul 22, 2008 8:21 am

The seal looks flush. I will pull the cover and re-examine the fork. I thought since I've had it apart for a while I may have missed a washer or something.
Thanks, Lee

Post Reply




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home