honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

internal throttle

Fuel System: Gas (Petrol) tanks, Carburators
Post Reply
tom0811
honda305.com Member
Posts: 10
Joined: Fri Mar 14, 2014 4:39 pm
Location: chicago

internal throttle

Post by tom0811 » Thu Jul 10, 2014 12:16 am

Could use some help. Does anyone have an original set of 65 Ca77 bars that they can post a pic or give dimensions on the slot for the throttle? I am putting new bars on my bike and I dont have the original bars. Thanks Tom

User avatar
Waveblaster
honda305.com Member
Posts: 215
Joined: Fri Dec 27, 2013 11:13 am
Location: Perth Western Australia

Post by Waveblaster » Thu Jul 10, 2014 8:25 am

I am 90% certain the bars are the same for the Ca77 as the CA92 and CA95. At least that was the case on my 1964/65 machines. Aftermarket ones of those are available from Ebay as are the throttle mechanisms. I think a few of the Thai stores stock them.

They measure 700mm end to end

Just an option.

SWARDLAW
honda305.com Member
Posts: 57
Joined: Mon Jul 01, 2013 11:50 am
Location: greenville s.c.

Post by SWARDLAW » Thu Jul 10, 2014 12:06 pm

I have an original set of bars that I have taken of my ca77. I swapped them out for a set that I made from a lower rise bar (superbike bend). I will measure the bar tonight and get you a length and width for the slot. It's a pretty easy job to make any handlebar fit these bikes.

tom0811
honda305.com Member
Posts: 10
Joined: Fri Mar 14, 2014 4:39 pm
Location: chicago

Post by tom0811 » Fri Jul 11, 2014 8:05 pm

Thank You that would be great

User avatar
Waveblaster
honda305.com Member
Posts: 215
Joined: Fri Dec 27, 2013 11:13 am
Location: Perth Western Australia

Post by Waveblaster » Sat Jul 12, 2014 9:05 am

Swardlaw

I am curious to know what method you used to cut the slot?

Greg

Post Reply




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home