305 Dream Carb Rebuild

[Johnm32073]

I have a 1966 305 Dream . It ran find till one one day I tryed to rebuild the carburetor (PW22) CA77 engine and I really messed that up. Does anyone know of anyone that I can send this carb to that rebuild it? or anyone can tell me how to adjust the needles in it That is where I messed it up
john in Jacksonville Fl

[brewsky]

Welcome to the forum.
You can probably fix it yourself if you are at all mechanically inclined.
What have you done to it already since it was running?

[LOUD MOUSE]

I do rebuilds of that carb.
Get in touch PM. ........lm

I have a 1966 305 Dream . It ran find till one one day I tryed to rebuild the carburetor (PW22) CA77 engine and I really messed that up. Does anyone know of anyone that I can send this carb to that rebuild it? or anyone can tell me how to adjust the needles in it That is where I messed it up
john in Jacksonville Fl

[Johnm32073]

Brewsky I took it apart and put it back together.Then again I know about Carburetor.(motorcycle or Cars) But I can do engine work I did count the 1/2 turns it took to to remove the jet screws and put them back the same turns.
I did get a rebuild package for my petcock, but the gasgets that came with it for the bowl warps and deforms when fuel sets on it for a while causing it to leak like crazy That may be some of my problem

[Johnm32073]

LM,, I Want to get in touch with you about you rebuilding the carb. Going to work tomorrow I will be gone two weeks about it.

[brcree]

Can I but in here and ask?........I rebuilt my carb., CA77........and need to know where to set air/fuel needle and the idle needle at for my first start up.

[brewsky]

Mix screw (closest to engine) .........1 1/4 out from lightly seated.

Idle speed screw, .....turn in till you can just feel the slide starting to move up from bottomed out.

Wait till the engine is completely warmed up before making final adjustments.