Honda305.com Forum

Mouse do you have the part numbers for the fiber and metal disks for the clutch and also the o-ring in the end of the shaft where the clutch push rod comes out. Is there a standard size I can just go get at the hardware?<br /><br />Also, are the metal disks supposed to have a flatter surface on one ...

I tried 30w and 10w-30 valv. I stopped at a honda dealer and bought some honda motorcycle oil but have yet to put it in. That oil is 10w-30. They said it is different than standard motor oil. I had this problem since putting this bike on the road and no one that I talked to yet said the oil could be...

Are the metal clutch disks still available?One side seems to be more flat then the other,Also, can they warp? I have posted on my sticky clutch before but why it sticks does not make sense, other than old parts. It will stick when sittting overnight and I have to rev it up for a a minute for the dis...

I had a siilar problem when rebuilding my carb. plugs fouled within a short distance of riding. Too rich!! They really need to be cleaned very well before putting back in. When you rebuilt your carb did you put main needle clip in the same notch? If you did like I did it will be wrong unless your je...

Mouse do you feel it could be just the inner disks that are sticking and not the whole pack? Also, I have torn four of these clutch packs apart and they have all had the clips on them. The only difference in one was the all fiber disk. The other three had the fiber disks witht metal centers and same...

I did have aliittle trouble getting the clip on and it did seem to have alot of drag on that first disk so I took the ting off. But that clutch is on the bench waiting to be put back on my other engine. I did not try the clutch pack yet with new disks and clips off. The disks I got on ebay are 4mm. ...

Has anyone purchased any of the repro seat covers that are being sold on ebay? Any opinions helpful.