Search found 57 matches
Neutral Switch and Shift DrumHello all, I rebuilt the engine in my CB77 from boxes of parts several years ago. I am finishing up the build and went to install the neutral switch. When the bike is in neutral the slot in the end of the shift drum does not align with the pin position for the neutral switch that enables the light t...
Wanted - CB77 Front FenderHello all, I'm looking for a front fender for a cafe racer project I'm working on. I started this project with boxes of parts from a 1962 Honda CB77 my father-in-law had while in the army in the late sixties. I do not need a fender in original condition. A bobbed fender would be just perfect. I also...
Re: Brake shoe and brake arm springsG-man, Thanks for the reply. Your picture shows exactly what I was talking about. Those are the two types of springs I have. It looks like the shorter fatter ones are stronger and therefore would result in a harder pull at the handle. Do you think Honda switched to the longer, skinner ones because o...
Re: Brake shoe and brake arm springsI will try to add the photos if I can figure it out.
Brake shoe and brake arm springsAs I continue my journey of building a CB77 from boxes of parts I have a question about the various brake springs. I have 4 sets of brake shoe springs. 2 sets have thicker wire and larger diameter coils. The other 2 sets have thinner wire and smaller diameter coils. Did Honda use different springs f...
Re: Wheel hub collarAs always your knowledge and advice is much appreciated. Happy new year.
Wheel hub collarThis may be a dumb question, but do the collars between the wheel bearings get packed with grease? I am using sealed wheel bearings so I know those won’t need grease but I am unsure what to do with the collar between the bearings. Any and all advice greatly appreciated.
Ken
|