Honda305.com Forum

Success. So you guys were all right. Thanks for the help. The hose clamps worked out perfect. The hose clamps are just wide enough to cover all three rings. Just make sure the clamp and rings are oiled and tighten the clamps to just the right tension that they will compress the rings but still loose...

Unfortunately I don't have anyone around to give the extra hands so I'm stuck trying to make it happen myself. I have some old hose clamps laying around but I'm not sure if they are going to be wide enough to do the job. I'm usually in the habit of trying to do things without too many costly tools b...

Alright..im going to give it another shot tomorrow. Ive been trying to do it by myself with the thin wooden dowel but to no avail. If I make a ring compressor out of a metal hose clamp should I put anything under the clamp to protect the rings or just the clamp by itself. And would it be good idea t...

hey guys so im trying to get my ca77 back on the road. I finally got my cylinders bored to 1mm os and the new 1mm os pistons and rings installed but im having trouble trying to compress the rings to slip the cylinders down into place. Because the pistons move 360° together its hard to compress the r...

Hello. Could I please have a copy of that carb adjustment file. I would greatly appreciate it.

Thankyou
Forest
charmcity25@yahoo.com

This is a problem that just developed a few months ago after I took a ride through the mountains. I was thinking that all the hill climbing put extra stress in the engine and took the last life out of the piston rings. I will do a compression test but I am thinking that the gaskets were correctly in...

Hello Everyone. I was hoping someone with some more knowledge might give a little advice. When I am riding I am having oil pumped out of the breather tube at the top of the engine and its coming out at a fast rate. I am assuming that the 305 engine breather tube is designed to release pressure in th...