Honda305.com Forum

A little background on the bike that I should have supplied. I got it as a parts bike with a cl some years ago. It was already a chopper but done to a very poor standard. My thoughts were to build it up cheap as a rat and put it back to its former glory but with all the details sorted. Initially I p...

I started a build thread if anyone is interested in following along.


http://www.honda305.com/forum/index.htm

Thanks again to all who helped out.

Some of you may have seen my previous postings trying to figure out wheel spacing on the front. Thanks to the knowledge base here I figured it out. Find it here. http://www.honda305.com/forum/index.htm I figured I would start a build thread to document the rest of the bike. Be forewarned I am not go...

Thanks Oldscrambler but I am all set. I built mine.

I just need to weld it together.

I have a pair of cb77 fork tubes in good shape. I bought a set but only needed the lowers and bushes. If you are interested in just the legs I have them.

I would need to double check the size but I think they are 35mm at the lower triple and 33mm at the slider.

Bummer, just crafted a great reply and deleted it somehow. Here is the cliff note version. Bent triple. 25mm OD for the main bit. http://i566.photobucket.com/albums/ss110/klp42/Mobile%20Uploads/photo1-6.jpg Here is the replacement, the nut in the center is 29mm across. http://i566.photobucket.com/al...

I would be happy to send a pic Gman. I will get it done later tonight.

Just my luck I get an early one when I was hoping for 35mm bores! Hahaa.

Thanks for the info, I appreciate knowing what I have and why it is different.