Honda305.com Forum

Yes... a giant "THANK YOU" is in order for all the info Paul has shared. He has been a great resource in getting this old bike apart and back together. There really is no info out there on the C200 model and this forum has been a nice depot for information on this motorbike. I truly appreciate his t...

Does anyone have any tips for gettings the settings right for startup? I totally dissasembled the carb and don't know where the fuel/air and idle screw settings should be.
Does anyone have some pointers for a sucessful start after an engine and carb rebuild?

I got most of the bike's loose ends buttoned up and I am ready to start up the motor. Combustion, spark, battery, key turned on... check.
Now, I wish I knew which position the little slider on the left side should be in. Does anyone know what these positions are for? Headlight? Engine kill?

Paul, once again, your expertise and knowledge is inspiring. I love the detail you put into your projects. I was able to use your posted picture and get things lined up between the cam and cylinder. Now, the next step involves putting the 2 crank case covers back together. The only problem is that t...

Well, I figured out that one of the transmission shift forks was worn out. Now that I have it replaced, I need to put the motor case back together. My question is this... How do I get the cam timed with the cylinder when I put the halves back together? I need to figure out when the intake / exhaust ...

So my project continues... I have figured out where the fault is on the bike and why it won't stay in neutral. It seems the 2 shafts from the transmission are not seating properly and the play of the shaft in the crankcase housing are causing the gears to mesh and pull themself into gear. I am going...

Well, I took apart the right side of the bike. I looked at the clutch, gears, springs etc. and everything appears to be in proper order on the right side of the bike. I opened the outer case on the left side of the bike and discovered the stator, generator and other electrical stuff. I think I need ...