Honda305.com Forum

A knowlegeable buyer will not pay $9,500 for that bike but, someone might. The fender has the same problem my '67 has and I know it didn't come from the factory that way. It was hit in the front and pushed the front half of the stay up and the rear half down. I remember that all Scramblers came with...

Go for it! I rebuilt a 250 dream motor when I was 15 1/2. And if I remember right I rode it for a year or so after that without problems. Either these motors are very robust and forgiving or I got lucky! Get a manual, don't be in a hurry, read the past posts here and ask for help here. You'll be fin...

The Hawk came stock with flat bars. Back in the day many of us would replace them with the Scrambler bars for "comfort" or "coolness", I can't remember which. If you switch back to flat bars you will have to change your cables back to shorter cables. BTW, I'm not sure but I believe there is more tha...

Vintage Connections.
They have all the sizes and connectors. And the silver tape.
JC

I think it is just about 2 quarts. Check with your dipstick but, remember to not screw it in.
Jim

Kustommusic, I used Ed Moore's tune up guide, but I'll double check. Thanks Phil, My Clymer's manual says 26.5mm for the CL77 and most of the posts here use that measurement. I'll double check that too. Thanks Loudmouse, That sounds to easy to be true but, it's tricks like these that comes from year...

I've read all of the posts regarding carb adjustments and especially float adjustments. I have two questions to ask just to clarify: 1. The float setting of 26.5 mm is measured from the surface that the bowl gasket seals against or, is it measured from from the top of the "lip" that surrounds the ga...